January 2014 - BBS Plumbing and Heating

Whenever Bernard my master is asked what my favourite food is the answer is anything that’s on his plate! When it comes to anything a dog wants to play with it’s theirs but when it’s broken, it’s yours!

A bit unfair on humans, I know, but we are loyal and make the best guards and guides, which can sort out all sorts of safety prevention problems for our masters.

In fact sorting out problems is exactly what a busy plumber like Bernard is definitely about, of course. Customers are always looking for a great service at the best price and when a plumber needs to be found to fix a problem, there is always a worry over being overcharged or extra time being added to the final bill.

Experienced plumber – accurate estimate

A good and experienced plumber should firstly, always tell the customer the exact cost and time of callout charges over the phone. Often problems can be rectified within the set call out period unless the job requires additional time to complete. Once again, an experienced plumber will be able to give an accurate estimate to include all parts and labour.

Even I have to wait to be fed while Bernard is busy fixing a boiler! But I always try to sniff out a half eaten chocolate bar or crisp bag to keep me going!

Information helps the plumber

However, a customer can often help themselves and the plumber with a little bit of plumbing knowledge. Rather than simply panic when waking one morning and finding you have no hot water, or a leak, for example, a few simple checks can save time for both you and the plumber.

A leak can be a straightforward problem. Firstly, find the stop-cock and turn off and then try to find where the leak is coming from so when you do ring a plumber you can provide the information, which will help pinpoint the problem and the likely time and cost to put right.

No hot water…

However, no hot water is probably the most common reason to call a plumber. Those with a gas water heater installed will need to firstly make sure the pilot light has not gone out and check the temperature setting on the water heater is set high enough to provide adequate amounts of hot water.

With an electric boiler heater, the first thing to do is see if there is power going to the heating elements. Check for a tripped circuit breaker or a blown fuse on the water heater circuit in the wiring centre or fuse box. If power has not been disrupted then it’s possible that the electric thermostat or a heating element has become faulty.

If a water heater is leaking, then it’s likely that rust has eaten away through the bottom of the water storage tank, and the water heater may need to be replaced.

Once again, having made the simplest of preliminary checks and carefully explaining the symptoms over the phone to the plumber could save precious time and money!

It also means that Bernard might get to feed me on time and save me having to raid the biscuit barrel!

Bernard’s family all settled down to watch “101 Dalmatians” on the TV over Christmas.

When it finished, Bernard was asked how it was possible that I was staring so intently at the screen almost as if I was really involved with the movie! It was noticed that I whimpered at all the sad moments, moved around nervously in my basket at scary bits, but most of all, howled like crazy at the funny parts.

“Yes,” said Bernard “It was weird of Moo to do that. He hated the book!”

Woof woof!

There was a lot of terrible wet weather over Christmas and New Year but it’s been mild so no emergency callouts to deal with freezing pipes like last year – yet! We hear that some of the polar conditions currently being experienced in the US are due to arrive here in the UK next week! But Bernard and I are always ready and know exactly what to do when pipes freeze, radiators or boilers stop working…

1 in 6 households are in hard water areas

A particular problem in the greater London area where Bernard mostly works is the build up of limescale, which can cause major problems in central heating systems. More than six in ten properties around the UK are supplied with hard water rich in minerals such as limestone. The average household living in an area with hard water will accumulate around 70kg of limescale in just 12 months, clogging up hot water pipes, appliances and heating systems.

Of course, I don’t mind how hard the water is as long as there is plenty always in my bowl (or else I will find a drink elsewhere – woof, woof!

First signs of a problem will be boiler noise

Limescale is formed when water is heated above 55 degrees and tends to form in the hottest part of the system. The first signs of a problem will be boiler noise caused by overheating of the water as a result of steam bubbles, which collapse loudly as they move away from the heat transfer surface and into the cooler water.

As limescale builds up on the heat transfer surface it has a direct impact on system efficiency, which can be reduced by 12 per cent by just a 1.6mm layer of scale, according to British Water. A loss of heat transfer efficiency means the boiler has to work harder by burning more fuel, resulting in an increase in home energy bills.

Bernard often finds that it is the build up of limescale that is the culprit when investigating a customer’s noisy boiler!

Protecting appliances and pipework

Preventing a build up is easy these days. From using chemical water softeners (for appliances such as kettles, washing machines and dishwashers) to installing electronic descalers to protect the pipework and ultimately, the boiler. Never try to forcefully chip scale away from tap nozzles or heating elements as this will likely to cause structural damage.

I have to admit the I’m not too keen on tasting the white crunchy bits of limescale myself – I much prefer one of Bernard’s tasty hobnobs!

Helping the Plumber Over The Phone Can Save You Time And Money!

Preventing Limescale Building Up A Large Scale Boiler Problem