Whenever Bernard my master is asked what my favourite food is the answer is anything that’s on his plate! When it comes to anything a dog wants to play with it’s theirs but when it’s broken, it’s yours!

A bit unfair on humans, I know, but we are loyal and make the best guards and guides, which can sort out all sorts of safety prevention problems for our masters.

In fact sorting out problems is exactly what a busy plumber like Bernard is definitely about, of course. Customers are always looking for a great service at the best price and when a plumber needs to be found to fix a problem, there is always a worry over being overcharged or extra time being added to the final bill.

Experienced plumber – accurate estimate

A good and experienced plumber should firstly,  always tell the customer the exact cost and time of callout charges over the phone. Often problems can be rectified within the set call out period unless the job requires additional time to complete. Once again, an experienced plumber will be able to give an accurate estimate to include all parts and labour.

Even I have to wait to be fed while Bernard is busy fixing a boiler! But I always try to sniff out a half eaten chocolate bar or crisp bag to keep me going!

Information helps the plumber

However, a customer can often help themselves and the plumber with a little bit of plumbing knowledge. Rather than simply panic when waking one morning and finding you have no hot water, or a leak, for example, a few simple checks can save time for both you and the plumber.

A leak can be a straightforward problem. Firstly, find the stop-cock and turn off and then try to find where the leak is coming from so when you do ring a plumber you can provide the information, which will help pinpoint the problem and the likely time and cost to put right.

No hot water…

However, no hot water is probably the most common reason to call a plumber. Those with a gas water heater installed will need to firstly make sure the pilot light has not gone out and check the temperature setting on the water heater is set high enough to provide adequate amounts of hot water.

With an electric boiler heater, the first thing to do is see if there is power going to the heating elements. Check for a tripped circuit breaker or a blown fuse on the water heater circuit in the wiring centre or fuse box. If power has not been disrupted then it’s possible that the electric thermostat or a heating element has become faulty.

If a water heater is leaking, then it’s likely that rust has eaten away through the bottom of the water storage tank, and the water heater may need to be replaced.

Once again, having made the simplest of preliminary checks and carefully explaining the symptoms over the phone to the plumber could save precious time and money!

It also means that Bernard might get to feed me on time and save me having to raid the biscuit barrel!